Displays various BOOTP Relay configuration details.
ipv4 | Specifies unconfiguring the DHCPv4 BOOTP Relay service (default). |
ipv6 | Specifies unconfiguring the DHCPv6 BOOTP Relay service. |
vlan | Unconfigures BOOTP relay for a specified VLAN (Virtual LAN). |
vlan_name | Specifies the VLAN name. |
include-secondary | Removes the include-secondary configuration for the specified VLAN. |
Use this command to display various bootprelay configuration details.
The following command displays IPv4 bootprelay statistics:
# show bootprelay configuration ipv4 DHCPv4 BOOTP Relay : Enabled on virtual router "VR-Default" Include Secondary : Enabled (parallel) BOOTP Relay Servers : DHCP Relay Agent Information Option: Enabled DHCP Relay Agent Information Check : Disabled DHCP Relay Agent Information Policy: Replace VLAN DHCPv4 BOOTP Relay ------------------------ ------------------ VLAN "Default": BOOTP Relay : Enabled Include Secondary : Enabled (sequential) BOOTP Relay Servers : 192.168.1.1 DHCP Relay Agent Information Option: Enabled DHCP Relay Agent Information Check : Disabled DHCP Relay Agent Information Policy: Replace VLAN "v1": BOOTP Relay : Enabled Include Secondary : Enabled (sequential) BOOTP Relay Servers : 10.1.1.1 DHCP Relay Agent Information Option: Enabled DHCP Relay Agent Information Check : Disabled DHCP Relay Agent Information Policy: Replace
This command was first available in ExtremeXOS 15.4.