configure stpd ports bpdu-restrict

configure {stpd} stpd_name ports bpdu-restrict [enable | disable] port_list {recovery-timeout {seconds}}

Description

Configures BPDU Restrict.

stpd_name	Specifies an STPD (Spanning Tree Domain) name on the switch.
port_list	Specifies one or more ports or slots and ports.
bpdu-restrict	Disables port as soon as a BPDU is received.
recovery-timeout	Time after which the port will be re-enabled.
seconds	Specifies the time in seconds. The range is 60 to 600. The default is 300.

The default is disabled.

Before using this command, the port(s) should be configured for edge-safeguard.

The following command enables bpdu-restrict on port 2 of STPD s1:

configure stpd s1 ports bpdu-restrict enable 2

This command was first available in ExtremeXOS 12.4.

Published September 2018prev | next