configure mvrp tag ports transmit

configure mvrp tag vlan_tag ports [port_list | all] transmit [on | off ]

Description

Controls whether the given VLAN (Virtual LAN) ID may be advertised in MVRP messages transmitted on the given set of ports.

mvrp	Multiple VLAN Registration Protocol.
tag	The 802.1Q VLAN ID.
transmit	When enabled, MVRP message are sent on the ports.
on	Transmission of MVRP messages are enabled on the port(s) for the given tag.
off	Transmission of the MVRP messages are disabled on the port(s) for the given tag.

Transmit on.

Use this command to control whether the given VLAN ID may be advertised in MVRP messages transmitted on the given set of ports.

The following command configures transmit off for VLAN ID 100 on all MVRP ports:

configure mvrp tag 100 ports all transmit off

This command was first available in ExtremeXOS 15.3.

Published September 2018prev | next