Displays the status of MLD-SSM mapping feature on a VR (if it is enabled or disabled), and displays the MLD-SSM mapping entries.
v6groupnetmask | Displays the specific group information. When v6groupnetmask is not specified, the SSM Mapping status and all SSM Mapping entries on the VR are displayed. |
vr vr_name | Specifies the virtual router name. |
N/A.
Use this command to display the status of MLD-SSM mapping feature on a VR (if it is enabled or disabled), or to display the MLD-SSM mapping entries.
The following command displays MLD SSM mapping on a VR :
# show mld ssm-map MLD SSM mapping : Enabled Group ------ Flags Source ----- ------- ff33::1/128 d 2001:0DB8:1::3 d 2001:0DB8:1::4 ff33::2/128 - 2001:0DB8:1::5 - 2001:0DB8:1::6 Flags : (d) Dynamic address obtained from DNS server Total Entries : 6
When v6groupnetmask is specified, the SSM Mapping status and the SSM Mapping entries specific to the group range on the VR are displayed.
The following example displays a group containing only DNS name. “DNS” in parenthesis indicates the source is learned from the DNS server.
# show mld ssm-map ff33::1/128 MLD SSM mapping : Enabled Group : ff33::1/128 DNS Name : abc DNS Age : 1512 seconds Sources : 2001:0DB8:1::3(DNS) 2001:0DB8:1::4(DNS) Total Entries : 4
The following example displays a group not configured with DNS name.
# show mld ssm-map ff32::1/128 MLD SSM mapping : Enabled Group : ff32::1/128 Sources : 2001:0DB8:1::5 2001:0DB8:1::6 Total Entries : 2
This command was first available in ExtremeXOS 15.5.
This command is available on the platforms listed for the IPv6 multicast routing feature in the ExtremeXOS 22.6 Feature License Requirements document.