This command configures the LAG (Link Aggregation Group) bandwidth mode as either cumulative or master-port only.
all | All the ports in the switch. |
port_list | Port list separated by a comma or - |
cumulative | Use bandwidth of a single port, plus a percentage of bandwidth of every other LAG member port in the group. |
single-port | Use bandwidth of a single port only for the entire LAG. |
percentage | Percentage of bandwidth of each LAG port to be added to master port bandwidth. |
Single-port.
If cumulative mode is selected, the percentage is also configured.
This CLI command displays bandwidth information of an MSRP port.
# show msrp ports bandwidth Port Port Class Delta Maximum Reserved Available Speed Effective ------ ------- ----- --------- --------- --------- --------- 5ab 0 M A 75.00% 0.00% 0.00% 0.00% B 0.00% 0.00% 0.00% 0.00% *21ab 1000 M A 75.00% 75.00% 0.00% 75.00% B 0.00% 75.00% 0.00% 75.00% Flags: (*) Active, (!) Administratively disabled, (a) SR Class A allowed, (b) SR Class B allowed.
This command was first available in ExtremeXOS 21.1.
This command is available on Summit X450-G2, X460-G2, and X670-G2 switches if the AVB feature pack license is installed on the switch.