configure ospf vlan neighbor add

configure ospf vlan vlan-name neighbor add ip-address

Description

Configures the IP address of a point-to-point neighbor.

vlan-name	Specifies a VLAN (Virtual LAN) name.
ip-address	Specifies an IP address.

N/A.

None.

The following command configures the IP address of a point-to-point neighbor:

configure ospf vlan accounting neighbor add 10.0.0.1

This command was first available in ExtremeXOS 10.1.

This command is available on platforms with an Advanced Edge or Core license as described in the ExtremeXOS 22.6 Feature License Requirements document.

Published September 2018prev | next