configure lldp ports vendor-specific dot3 link-aggregation

configure lldp ports [all | port_list] [advertise | no-advertise] vendor-specific dot3 link-aggregation

Description

Configures the LLDP (Link Layer Discovery Protocol) port to advertise or not advertise link-aggregation capabilities to its neighbors.

Syntax Description

all Specifies all ports on the switch.
port_list Specifies one or more ports or slots and ports.
advertise Specifies to send the information to neighbors.
no-advertise Specifies not to send the information to neighbors.

Default

No advertise.

Usage Guidelines

When configured, this TLV is added to each LLDP port LLDPDU indicating the link-aggregation capabilities, status, and value of the master port of the load-sharing group.

Example

The following command configures port 1:12 to not advertise link-aggregation capabilities to neighbors:

configure lldp ports 1:12 no-advertise vendor-specific dot3 link-aggregation

History

This command was first available in ExtremeXOS 11.2.

Platform Availability