configure lldp ports vendor-specific dot3 mac-phy

configure lldp ports [all | port_list] [advertise | no-advertise] vendor-specific dot3 mac-phy

Description

Configures the LLDP (Link Layer Discovery Protocol) port to advertise or not advertise MAC and physical layer capabilities to its neighbors. The capabilities include duplex and bit rate.

Syntax Description

all Specifies all ports on the switch.
port_list Specifies one or more ports or slots and ports.
advertise Specifies to send the information to neighbors.
no-advertise Specifies not to send the information to neighbors.

Default

No advertise.

Usage Guidelines

When configured, the system advertises information about the speed capabilities, as well as autonegotiation support and status, of the LLDP port.

Example

The following command configures all ports to advertise MAC/PHY capabilities to neighbors:

configure lldp ports all advertise vendor-specific dot3 mac-phy

History

This command was first available in ExtremeXOS 11.2.

Platform Availability