Defines masks for the IPv4 source and destination address flow keys.
port_list | Specifies the ports. |
source | Specifies a source IP address. |
destination | Specifies a destination IP address. |
value | Specifies the IP address mask (in standard format). |
N/A.
Use this command to define masks for the IPv4 source and destination address flow keys on a per port basis. For example, this can be used to minimize the information sent to the collector and aggregate flows.
The following command defines a mask for source IP address flow key 255.255.0.0 on port 21:
configure ip-fix ports 21 flow-key ipv4 mask source ipaddress 255.255.255.0
This command was first available in ExtremeXOS 12.5.
This command is available on the Summit X460-G2 series switches.