enable mpls rsvp-te bundle-message

enable mpls rsvp-te bundle-message [{vlan} vlan_name | vlan all]

Description

Enables the bundling of RSVP-TE messages for the specified VLAN (Virtual LAN) interface.

Syntax Description

vlan Specifies that message-bundling is to be enabled on one or more VLAN interfaces.
vlan_name Identifies a VLAN interface for which message bundling is to be enabled.
vlan all Specifies that message bundling is to be enabled on all VLANs that have been added to MPLS (Multiprotocol Label Switching).

Default

Disabled.

Usage Guidelines

Enabling message bundling can improve control plane scalability by allowing the switch to bundle multiple RSVP-TE messages into a single PDU. Not all devices support bundled messages. If the switch determines that a peer LSR, connected to a specific interface, does not support message bundling, the switch reverts to sending separate PDUs for each message on that interface. By default, message bundling is disabled. Specifying the all keyword enables message bundling on all MPLS-configured VLANs.

Example

The following command enables message bundling on the specified VLAN:

enable mpls rsvp-te bundle-message vlan vlan_1

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 22.6 Feature License Requirements document.