Shows the OpenFlow controller configuration and status on the switch.
| primary | Specifies the primary openflow controller. |
| secondary | Specifies the secondary openflow controller. |
None.
None.
The following example displays the current configuration for the primary controller:
show openflow controller Controller : Primary Configured : Yes Datapath ID : abcdef0123456789 VR : VR-Default Mode : out-of-band Active Target : tcp:10.1.1.1:6633 Status : ACTIVE SSL : Disabled Probe(secs) : 30 Uptime(secs) : 130 Rate Limit : 1000 Burst Size : 250 Packets Sent : 9 Packets Received : 8 Controller : Secondary Configured : No
This command was first available in ExtremeXOS 15.3.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the BGP (Border Gateway Protocol) feature, see the ExtremeXOS 22.6 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB