Clears a slot of a previously assigned module type.
slot | Specifies the slot number. |
N/A.
All configuration information related to the node and the ports on the switch is erased. If a node is present when you issue this command, the switch is reset to default settings.
If a node is configured for one type of switch, and a different type of switch is inserted in the stack, the inserted node is put into a mismatch state (where the inserted node does not match the configured node), and is not brought online. To use the new switch type in a node, the node configuration must be cleared or configured for the new switch type. Use the enable mirroring to port tagged command to configure the node.
The following command clears node 2 of a previously assigned switch type:
clear slot 2
The following command clears slot 4 of a previously assigned switch type in a stack:
clear slot 4
This command was first available in ExtremeXOS 10.1.
This command is available on SummitStacks.