Enables PoE (Power over Ethernet) power to the specified node (slot) on SummitStacks.
slot | Enables inline power to specified slot. |
Enable.
Disabling inline power to a slot immediately removes power to any connected PDs. By default, inline power provided to all slots is enabled.
To deliver inline power to slots, you must reserve power for that slot using the configure inline-power budget command. By default, each PoE module has 50 W of power reserved for inline power.
Disabling inline power using the disable inline-power command does not affect the data traffic traversing the slot. And, disabling the slot using the disable slot command does not affect the inline power supplied to the slot.
If you do not specify a slot number, the command operates on all active nodes in the stack. This command operates only on nodes in the active topology.
The following command makes inline power available to slot 3:
enable inline-power slot 3
This command was first available in ExtremeXOS 11.1.
This command is available on SummitStack when the stack contains Summit family switches listed in Extreme Networks PoE Devices.