Shuts down PoE (Power over Ethernet) power currently provided on all ports on all slots.
This command has no arguments or variables.
Enable.
You can control whether inline power is provided to the system by using the disable inline-power command and the enable inline power command. Using the disable inline-power command shuts down inline power currently provided on the entire switch or to specified ports and slots. Disabling inline power to a switch, port, or slot immediately removes power to any connected PDs. By default, inline power provided to all ports is enabled.
Note
Disabling inline power using the disable inline-power command does not affect the data traffic traversing the port. And, disabling the port using the disable port command does not affect the inline power supplied to the port.
Note
Inline power cannot be delivered to connected PDs unless the switch is powered on.
The following command shuts down inline power currently provided to all ports and all slots:
disable inline-power
This command was first available in ExtremeXOS 11.1.
This command is available on the PoE devices listed in Extreme Networks PoE Devices in the ExtremeXOS 22.6 User Guide.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB