This command shows ELRP configuration information for all, or specific types of, dynamic VLAN (Virtual LAN)s.
| dynamic-vlans | ELRP configuration options for dynamically created VLANs. |
| mvrp | Shows ELRP information for dynamic VLANs created by Multiple VLAN Registration Protocol (MVRP) only. |
| netlogin | Shows ELRP information for dynamic VLANs created by Network Login only. |
| vm-tracking | Shows ELRP information for dynamic VLANs created by virtual machine MAC tracking only. |
| all | (Default) Shows ELRP information for all dynamic VLANs. |
If you do not specify the type of dynamic VLAN, information about all types appear.
The following example shows ELRP information for all types of dynamic VLANs:
# show elrp dynamic-vlans VM-Tracking : ELRP on client ports : Enabled ELRP on uplink ports : Disabled Transmit interval : 1 second(s) Loop detect action : log and trap Port disable on loop : Yes Disabled port : Ingress Disabled duration : 30 seconds Netlogin : ELRP on client ports : Enabled ELRP on uplink ports : Disabled Transmit interval : 2 second(s) Loop detect action : log Port disable on loop : No MVRP : Enabled Transmit interval : 3 second(s) Loop detect action : trap Port disable on loop : Yes Disabled port : Egress Disabled duration : Permanent
The following example shows ELRP information for dynamic VLANs created by virtual machine MAC tracking only:
# show elrp dynamic-vlans vm-tracking VM-Tracking: ELRP for dynamic VLANs : Enabled ELRP on client ports : Enabled ELRP on uplink ports : Enabled
This command was first available in ExtremeXOS 22.2.
Loop detection action information was added in ExtremeXOS 22.3.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB