disable ripng export

disable ripng export [direct | ospfv3 | ospfv3-extern1 | ospfv3-extern2 | ospfv3-inter | ospfv3-intra | static | isis | isis-level-1| isis-level-1-external | isis-level-2| isis-level-2-external | bgp e-bgp i-bgp]

Description

Disables RIPng (Routing Information Protocol Next Generation) from redistributing routes from other routing protocols.

Syntax Description

direct Specifies directly reachable subnets from the router (only interfaces that have IP forwarding enabled are exported).
ospfv3 Specifies all OSPFv3 (Open Shortest Path First version 3) routes.
ospfv3-extern1 Specifies OSPFv3 external route type 1.
ospfv3-extern2 Specifies OSPFv3 external route type 2.
ospfv3-inter Specifies OSPFv3-inter area routes.
ospfv3-intra Specifies OSPFv3-intra area routes.
static Specifies user configured static routes.
isis Specifies IS-IS routes.
isis-level-1 Specifies IS-IS Level 1 routes.
isis-level-1-external Specifies IS-IS Level 1 External routes.
isis-level-2 Specifies IS-IS Level 2 routes.
isis-level-2-external Specifies IS-IS Level 2 External routes.
bgp Specifies BGP (Border Gateway Protocol) IPv6 routes
e-bgp Specifies EBGP routes.
i-bgp Specifies IBGP routes.

Default

Disabled.

Usage Guidelines

This command disables the exporting of static, direct, IS-IS, and OSPF (Open Shortest Path First)-learned routes from the switch routing table into the RIPng domain.

Example

The following command disables RIPng from redistributing any routes learned from OSPFv3:

disable ripng export ospfv3

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Edge, Advanced Edge, or Core license. For licensing information, see the ExtremeXOS 22.6 Feature License Requirements document.