show ovsdb schema hardware_vtep

show ovsdb schema hardware_vtep

Description

Shows high-level information for the hardware_vtep schema.

Syntax Description

schema OVSDB schema.
hardware_vtep Hardware VXLAN tunnel end-point (VTEP).

Default

N/A.

Example

The following example shows high-level information for the hardware_vtep schema:

# show ovsdb schema hardware_vtep
OVSDB server
============
Enabled :                 : yes
SSL certificate           : present

hardware_vtep schema
====================
Control Layer enabled     : yes
Data Forwarding enabled   : yes
LBS update interval       : 60 seconds

Configured connections    : 1
IP address        Port  Type          Schema          
---------------  -----  ------------  ----------------
10.68.6.191       6632  SSL - client  hardware_vtep   

Manager Table connections : 1
Target                      State       Time                 Count  Flags
--------------------------  ----------  -------------------  -----  -----
ssl:10.68.6.191:6632        active      2016-10-10 09:17:08      1  Uu   

Flags: (A) Server has active connections, (d) Most recent disconnect time
       (D) Client connection is down, (s) Connect and disconnect time are same
       (u) Most recent connect time, (U) Client connection is up
       (Z) Server has no connections

History

This command was first available in ExtremeXOS 22.1.

Platform Availability

This command is supported on the Summit X770, X670-G2, and ExtremeSwitching X590, X690, X870 series switches, and stacks with X590, X670-G2, X690, X770, X870 slots only.