Displays protocol filter definitions and the complete protocol configuration.
| filter | Displays a protocol filter. |
| name | Displays a protocol filter name. |
| detail | Displays protocol information in detail. |
Displays all protocol filters.
Displays the defined protocol filter(s) with the types and values of its component protocols.
The following is an example of the command's output:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB# show protocol
Protocol Filter Name Protocol Id Destination Field Field Field
Type Value Address Offset Value Mask
-------------------- -------- ------ ----------- ------- ------ -------
IP etype 0x0800
etype 0x0806
ANY ANY 0xffff
ipx etype 0x8137
IPv6 etype 0x86dd
lacp etype 0x8809 01:80:C2:00:00:02> 14 01 FF
mpls etype 0x8847
appletalk snap 0x809b
snap 0x80f3
> indicates that the value was truncated to the column size in the output.
Use the “detail” option to see the complete value.
show protocol detail
Protocol Filter Name : appletalk
Protocol Id Type : snap
Protocol Id Value : 0x809b
Destination Address:
Field Offset :
Field Value :
Field Mask :
Protocol Id Type : snap
Protocol Id Value : 0x80f3
Destination Address:
Field Offset :
Field Value :
Field Mask :
Protocol Filter Name : lacp
Protocol Id Type : etype
Protocol Id Value : 0x8809
Destination Address: 01:80:C2:00:00:02
Field Offset : 14
Field Value : 01
Field Mask : FF
# show protocol filter “lacp” detail
Protocol Filter Name : lacp
Protocol Id Type : etype
Protocol Id Value : 0x8809
Destination Address: 01:80:C2:00:00:02
Field Offset : 14
Field Value : 01
Field Mask : FF
This command was first available in ExtremeXOS 10.1.
The filter and detail keywords were added in ExtremeXOS 15.5.