show policy convergence-endpoint ports

show policy convergence-endpoint ports [port_list | all]

Description

This command displays the enable status of all supported Convergence End Point (CEP) types by port.

port_list	Shows enable status for the listed ports.
all	Shows enable status for all ports.

N/A

The following example shows the CEP enable status for port 3:

# show policy convergence-endpoint ports 3

Port        Cisco     LLDP-MED
----------  --------  --------
   3             enabled   disabled

This command was first available in ExtremeXOS 22.2.

Published September 2018prev | next