show rip interface

show rip interface {detail}

Description

Displays RIP (Routing Information Protocol)-specific configuration and statistics for all VLANs.

Syntax Description

detail

Specifies detailed display.

Default

Show summary output for all interfaces.

Usage Guidelines

Summary includes the following information per interface:
  • VLAN (Virtual LAN) name.

  • IP address and mask.

  • interface status.

  • packets transmitted.

  • packets received.

  • number of triggered updates.

  • cost.

Detail includes the following per interface:
  • VLAN name.

  • IP address and mask.

  • tx mode.

  • rx mode.

  • cost.

  • peer information (for each peer).
    • age.

    • version.

    • received packets.

    • received updates.

    • received bad packets.

    • received bad routes.

  • in policy.

  • out policy.

  • trusted gateway policy.

  • packets transmitted.

  • sent triggered updates.

  • packets received.

  • bad packets received.

  • bad routes received.

Example

The following command displays the RIP configuration for all VLANS:

show rip interface

The following is sample output from this command:

# show rip interface
VLAN       IP Address         Flags  Sent     Rcvd     Triggered Cost
Packets  Packets  Updates
Flags: (f) Interface Forwarding Enabled, (i) Interface RIP Enabled
(n) Multinetted VLAN, (r) Router RIP Enabled

The following command displays RIP-specific statistics for all VLANs:

show rip interface detail

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all platforms with an Edge, Advanced Edge, or Core license.