configure msrp latency-max-frame-size

configure msrp [ latency-max-frame-size frame_size | [ igonore-latency-changes | talker-vlan-pruning ] [ on | off ] ]

Description

This command configures the system-wide MSRP variables.

msrp	Multiple Stream Registration Protocol.
latency-max-frame-size	Maximum size of interfering frame (used in latency calculations).
frame_size	The maximum frame size in bytes (range 64 to 2000, default is 1522).
ignore-latency-changes	Ignore accumulated latency changes when evaluating first value change.
talker-vlan-pruning	Talker propagation is filtered on ports where VLAN (Virtual LAN) does not exist.
on	Turn on.
off	Turn off.

1522.

Use this command to configure the system-wide MSRP variables.

configure msrp latency-max-frame-size 100

This command was first available in ExtremeXOS 15.3. The ignore-latency-changes, talker-vlan-pruning, and on | off options were added in 15.3.2.

This command is available on Summit X450-G2, X460-G2, and X670-G2 switches if the AVB feature pack license is installed on the switch.

Published September 2018prev | next