enable mpls vlan

enable mpls [{vlan}vlan_name|vlan all]

Description

vlan	Enables an MPLS interface for one or more specific VLANs.
vlan_name	Enables an MPLS interface on the specified VLAN.
vlan all	Enables an MPLS interface for all VLANs that have been added to MPLS.

Disabled.

The following command enables an MPLS interface for the specified VLAN:

enable mpls vlan vlan-nyc

This command was first available in ExtremeXOS 11.6.

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 22.6 Feature License Requirements document.

Published September 2018prev | next