unconfigure vpls dot1q ethertype

unconfigure vpls vpls_name dot1q ethertype
Note

Note

This command has been replaced with the following command: unconfigure l2vpn [vpls vpls_name | vpwsvpws_name] dot1q ethertype .

This command is still supported for backward compatibility, but it will be removed from a future release, so we recommend that you start using the new command.

Description

Unconfigures the ethertype setting for the VPLS specified by vpls_name.

Syntax Description

vpls_name Identifies the VPLS within the switch (character string)

Default

N/A

Usage Guidelines

This command unconfigures the ethertype setting for the VPLS specified by vpls_name. The setting is changed back to the value displayed in the show dot1q command.

Example

The following command changes the ethertype setting for the specified VPLS to the value displayed in the show dot1q command:

unconfigure vpls my_vpls dot1q ethertype

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS (Multiprotocol Label Switching) as described in the ExtremeXOS 22.6 Feature License Requirements document.