Displays the contents of the IP routing table for routes with the specified origin.
bgp | Specifies BGP (Border Gateway Protocol) routes. |
blackhole | Specifies blackhole routes. |
bootp | Specifies BOOTP routes. |
direct | Specifies direct routes. |
ebgp | Specifies E-BGP routes. |
embgp | Specifies EMBGP routes. |
ibgp | Specifies I-BGP routes. |
icmp | Specifies ICMP (Internet Control Message Protocol) routes. |
imbgp | Specifies IMBGP routes. |
isis | Specifies IS-IS routes. |
isis-level-1 | Specifies IS-IS Level 1 routing. |
isis-level-1-external | Specifies IS-IS Level 1 External routing. |
isis-level-2 | Specifies IS-IS Level 2 routing. |
isis-level-2-external | Specifies IS-IS Level 2 External routing. |
mbgp | Specifies MBGP routes. |
mpls | Specifies MPLS (Multiprotocol Label Switching) routes. This option is available only on platforms that support the MPLS feature pack, which is described in the ExtremeXOS 22.6 Feature License Requirements document. |
signaling-protocol [ldp | rsvp-te | static] | Specifies an MPLS signaling protocol. This option is available only on platforms that support the MPLS feature pack, which is described in the ExtremeXOS 22.6 Feature License Requirements document. |
ospf | Specifies OSPF (Open Shortest Path First) routes. |
ospf-extern1 | Specifies OSPF External 1 routing. |
ospf-extern2 | Specifies OSPF External 2 routing. |
ospf-inter | Specifies OSPFInter routing. |
ospf-intra | Specifies OSPFIntra routing. |
rip | Specifies RIP (Routing Information Protocol) routes. |
static | Specifies static routes. |
unicast | Displays unicast routes with the specified origin. |
vrname | Specifies a VR or VRF. |
N/A.
None.
The following example displays all the BGP routes:
show iproute origin bgp
This command was first available in ExtremeXOS 10.1.
The ipv4 keyword was added in ExtremeXOS 11.2.
The embgp, mbgp, and mpls options were added and the ipv4 and multicast options removed in ExtremeXOS 12.2.2.