configure vlan router-discovery other-config-flag

configure vlan vlan_name router-discovery {ipv6} other-config-flag on_off

Description

Configures the other stateful configuration flag value sent in router discovery advertisements on the VLAN (Virtual LAN).

Syntax Description

vlan_name Specifies an IPv6 configured VLAN.
on_off Specifies setting the flag to on or off.

Default

Off.

Usage Guidelines

This command configures the contents of the other stateful configuration flag in the router advertisement messages.

When set to on, hosts use the administered (stateful) protocol (DHCP (Dynamic Host Configuration Protocol)) for autoconfiguration of other (non-address) information. If this command is not entered, the default value is off.

Example

The following example configures the other stateful configuration flag to be on for the VLAN "top_floor":

configure vlan top_floor router-discovery other-config-flag on

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS 22.6 Feature License Requirements document.