This command adds/removes a tenant VLAN (Virtual LAN) or VMAN to a virtual network.
| vn_name | Alphanumeric string indentifying the Virtual Network to be configured. |
| add | Add a tenant VLAN to the Virtual Network. |
| delete | Delete a tenant VLAN from the Virtual Network. |
| vlan | Specifies VLAN. |
| vlan_name | Name of the tenant VLAN. |
| vman | Specifies VMAN. |
| vman_name | Name of the tenant VMAN. |
N/A.
Only a single VLAN/VMAN can be added to a virtual network.
To add a VLAN to an existing Virtual Network:
configure virtual-network my_virtual_network add vlan vlan100
To remove a VLAN from an existing Virtual Network:
configure virtual-network my_virtual_network delete vlan vlan100
This command was first available in ExtremeXOS 21.1.
VMAN option added in ExtremeXOS 22.1.
This command is supported on the Summit X770, X670-G2, and ExtremeSwitching X590, X690, X870 standalone, and stacks with X590, X670-G2, X690, X770, X870 slots only.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB