clear access-list counter

clear access-list {dynamic} counter {countername} {any | ports port_list | vlan vlan_name} {ingress | egress}

Description

Clears the specified access list counters.

dynamic	Specifies that the counter is from a dynamic ACL (Access Control List).
countername	Specifies the ACL counter to clear.
any	Specifies the wildcard ACL.
port_list	Specifies to clear the counters on these ports.
vlan_name	Specifies to clear the counters on the VLAN (Virtual LAN).
ingress	Clear the ACL counter for packets entering the switch on this interface.
egress	Clear the ACL counter for packets leaving the switch from this interface.

The default direction is ingress; the default ACL type is non-dynamic.

Use this command to clear the ACL counters. If you do not specify an interface, or the any option, you will clear all the counters.

The following example clears all the counters of the ACL on port 2:1:

clear access-list counter port 2:1

The following example clears the counter counter2 of the ACL on port 2:1

clear access-list counter counter2 port 2:1

This command was first available in ExtremeXOS 10.1.

The vlan option was first available in ExtremeXOS 11.0.

The egress and dynamic options were first available in ExtremeXOS 11.3.

Published September 2018prev | next