Disables redistribution of routes to OSPFv3 (Open Shortest Path First version 3).
direct | Specifies direct routes. |
ripng | Specifies RIP (Routing Information Protocol) routes. |
static | Specifies static routes. |
isis | Specifies IS-IS routes. |
isis-level-1 | Specifies IS-IS Level 1 routes. |
isis-level-1-external | Specifies IS-IS Level 1 External routes. |
isis-level-2 | Specifies IS-IS Level 2 routes. |
isis-level-2-external | Specifies IS-IS Level 2 External routes. |
bgp | Specifies BGP (Border Gateway Protocol) IPv6 routes. |
e-bgp | Specifies EBGP routes. |
i-bgp | Specifies EBGP routes. |
The default setting is disabled.
Use this command to stop OSPFv3 from exporting routes derived from other protocols.
The following command disables OSPFv3 to export RIPng (Routing Information Protocol Next Generation) routes to other OSPFv3 routers:
disable ospfv3 export ripng
This command was first available in ExtremeXOS 11.2.
This command is available on platforms with an Advanced Edge or Core license as described in the ExtremeXOS 22.6 Feature License Requirements document.