Enables SNMP (Simple Network Management Protocol) traps associated with Layer 2 VPNs for all MPLS (Multiprotocol Label Switching) configured VLANs.
This command has no arguments or variables.
All Layer 2 VPN traps are disabled.
The following command enables SNMP traps associated with Layer 2 VPNs:
enable snmp traps l2vpn
This command was first available in ExtremeXOS 12.4.
This command is available only on the platforms that support MPLS as described in the ExtremeXOS 22.6 Feature License Requirements document.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB