Displays nexthop ipaddresses, up/down status, health-checking (ping/ARP/ND) and ACL (Access Control List) bindings.
| flow_redirect_name | Specifies the name of the flow redirection policy. |
N/A.
None.
The following example displays information for all redirection policies:
Switch.1 # show flow-redirect Name Nexthop Active VR Name Inactive Health Count IP Address Nexthops Check =================================================================== pkh 2 2001:400::100 VR-Default Forward PING ND: Neighbor Discovery
The next example displays an IPv6 redirection policy for a longer IPv6 address, which causes a two-line display for the related redirection policy:
Switch.13 # sh flow-redirect Name Nexthop Active VR Name Inactive Health Count IP address Nexthops Check ==================================================================== pbr1 2 2004:1000:1000:1000::10 VR-Default Forward PING ND: Neighbor Discovery
This example displays information for a specified IPv6 redirection policy:
* Switch.14 # show flow-redirect "pbr1" Name : pbr1 VR Name : VR-Default Inactive Nexthops: Forward Health Check : PING Nexthop Count : 2 Active IP Address : 2004:1000:1000:1000::10 Index State Priority IP Address Status Interval Miss ====================================================================== 0 Disabled 200 2003::10 DOWN 2 2 1 Enabled 100 2004:1000:1000:1000::10 UP 2 2
This command was first available in ExtremeXOS 12.1.
Support for IPv6 flow-redirection policies was added in ExtremeXOS 12.7.
This command is available for IPv4 and IPv6 flow-redirection policies on the platforms listed for the Policy Based Routing feature in the ExtremeXOS 22.6 Feature License Requirements document..
Print
this page
Email this topic
Feedback
View PDF
Download EPUB