show ospfv3 area

show ospfv3 area {area_identifier | detail}

Description

Displays information about OSPFv3 (Open Shortest Path First version 3) areas.

Syntax Description

area_identifier Specifies an OSPFv3 area, a four-byte, dotted decimal number.
detail Specifies to display the information in detailed format.

Default

N/A.

Usage Guidelines

None.

Example

The following command displays summary information about the OSPFv3 areas:

show ospfv3 area

The following is sample output:

AREA ID        Type Summ  Def   Num  Num  Num  SPF  Num    LSA
Metric ABR  ASBR Intf Runs LSAs   Checksum
0.0.0.0         NORM ---- ------ 0    0    1    7    7      0x3155b
1.0.0.0         NORM ---- ------ 1    1    1    6    9      0x4793d
2.0.0.0         NORM ---- ------ 0    0    1    5    10     0x47174
3.0.0.0         NORM ---- ------ 1    0    1    3    12     0x420cf
5.0.0.0         NORM ---- ------ 1    0    1    4    10     0x3b5b1

The following command displays information about OSPFv3 area 1.0.0.0:

show ospfv3 area 1.0.0.0

The following is sample output:

Area Identifier     : 1.0.0.0            Type                : NORM
Router ID           : 20.0.0.1           Num of Interfaces   : 1
Spf Runs            : 6                  Num ABRs            : 1
Num ASBRs           : 1                  Num DC-Bit LSAs     : 1
Num Indication LSAs : 1                  Num of DoNotAge LSAs: 1
Num LSAs            : 9                  LSA Chksum          : 0x4793d
Num of Nbrs         : 1                  Num of Virtual Nbrs : 0
Interfaces:
Interface Name                  Ospf State    DR ID           BDR ID
to65                            E    BDR      0.0.0.65        20.0.0.1
accounts                        E    DR       80.0.0.5        0.0.0.0
finance                         E    BDR      90.0.0.7        66.0.0.4
engineering                     E    ODR      192.168.0.1     165.0.0.3
Corporate                       E    ODR      201.0.16.6      204.0.0.1
Inter-Area route Filter: ospfSummPolicy
External route Filter: ospfExtPolicy
Configured Address Ranges:
Addr: fffe:408:1449::/48 Type: 3 Advt: Yes
Addr: ffe0:930:2781::/40 Type: 7 Advt: No

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Advanced Edge or Core license as described in the ExtremeXOS 22.6 Feature License Requirements document.