Displays information about neighbors in ports.
port_list | Specifies the port list, separated by a comma. |
configuration | CDP local port configuration. |
detail | Detailed information. |
N/A.
Use this command to display CDP port information.
The following command displays neighbor port information on the CDP feature:
# show cdp ports Neighbor Information-------------------- Port Device-Id Hold time Remote CDP Port ID Version ---- --------- --------- ---------- -------------------- 1 Eni-Extreme-x440-sw> 149 Version-1 Slot: 1, Port: 1 2 00:04:96:8B:9D:B0 160 Version-2 Slot: 1, Port: 2 7 00:04:96:8B:C1:ED 138 Version-2 Slot: 1, Port: 7
Note
">" indicates that the value was truncated to the column size in the output.Local Port Information ---------------------- Port Trust Cos VoIP VLAN VoIP VLAN Advertise ---- ---------- ---- ------------------------------- ------------ 1 Trusted 0 Default Solicited 2 Trusted 0 Default Unsolicited
# show cdp port 10 detail Neighbor Information -------------------- Device ID : X670G2-48x-4q Port ID (outgoing port) : Slot: 1, Port: 10 Advertisement Version : 2 Platform : X670G2-48x-4q Interface : 10 Holdtime : 162 Version : ExtremeXOS version 22.4.0.5 xos_22.4 by kosharma on Fri Jul 14 12:28:36 IST 2017 Native VLAN : 1 Duplex : Full Trust : Trusted SysName : X670G2-48x-4q
This command was first available in ExtremeXOS 15.4.
The output of this command was updated in ExtremeXOS 21.1.
The detailoption was added and the output of this command was updated in ExtremeXOS 22.5.