Displays ESRP (Extreme Standby Router Protocol) counter information for ESRP or for a specified ESRP domain.
name | Specifies an ESRP domain name. |
Displays summary ESRP counter information.
Failed received protocol packets
Failed sent protocol packets
Dropped protocol packets belonging to unknown ESRP domains
Dropped protocol packets due to invalid Extreme Encapsulation Protocol (EEP) data
Dropped packets due to old sequence numbers
Dropped packets due to an invalid 802.1Q tag
Dropped packets because the packet length was truncated (packet length is less than expected)
Dropped packets due to failed checksum verification
The show esrp {name} counters command displays information about the number of times ESRP, ESRP-aware, and ESRP error packets were transmitted and received.
The following command displays ESRP counter information:
show esrp counters
The following is sample output from this command:
Current-time: Sun Nov 16 00:25:08 2003 esrpStatsRxHelloFailed = 0 esrpStatsTxHelloFailed = 0 esrpStatsUnknownDomain = 0 esrpStatsUnsupportedEEPVersion = 0 esrpStatsInvalidEEPLength = 0 esrpStatsNotInTimeWindow = 0 esrpStatsInvalid8021Qtag = 0 esrpStatsInvalidSNAPType = 0 esrpStatsUndersizePkt = 0 esrpStatsInvalidChecksum = 0 esrpStatsWrongDigest = 0
The following command displays counter information for ESRP domain ed5:
show esrp ed5 counters
The following is sample output from this command:
Domain: ed5 Current-time: Sun Nov 16 00:25:27 2003 Rx-Esrp-Pkts = 628 Tx-Esrp-Pkts = 630 Rx-Aware-Esrp-Pkts = 112 Tx-Aware-Esrp-Pkts = 34 Rx-Err-Pkts = 0 Tx-Err-Pkts = 0
This command was first available in ExtremeXOS 11.0.