show snmp vr_name

show snmp {vr} vr_name

Description

Displays the SNMP (Simple Network Management Protocol) configuration and statistics on a virtual router.

Syntax Description

vr_name

Specifies the virtual router.

Default

N/A.

Usage Guidelines

Use this command to display the SNMP configuration and statistics on a virtual router.

Example

The following command displays configuration and statistics for the virtual router VR-Default:

show snmp vr VR-Default

Following is sample output for the command:

x670.54 # show snmp vr "VR-Default"
SNMP access                      : Enabled
SNMP ifMib ifAlias size          : Default
SNMP Traps                       : Enabled
SNMP TrapReceivers               :    
    Destination         Source IP Address       Flags   
   10.120.91.48 /162    32.1.0.2                2ET   
   10.120.91.48 /162    32.2.0.2                2ET
2001:2001:2001:2001:2001:2001:2001:2001 /16200  2001:2001:2001:2001:2001:2001:2001:20022ET
2001:2001:2001:2001:2001:2001:2001:2004 /16200  2ET
2334:0:0:0:0:0:0:2 /11555                       2ET
Flags:  Version: 1=v1 2=v2c 3=v3        
        Mode: S=Standard E=Enhanced        
        Notification Type: T=Trap I=Inform 

SNMP stats:     InPkts 0       OutPkts   0       Errors 0     AuthErrors 0                
                Gets   0       GetNexts  0       Sets   0     Drops      0
SNMP traps:     Sent   0       AuthTraps Enabled

History

This command was first available in ExtremeXOS 12.4.2.

The SNMP ifMib ifAlias size status was added in ExtremeXOS 15.3.

The output was modified to display SNMPv3 notification targets and the notification type in ExtremeXOS 15.5.