Configures the transmission interval of DMM frames.
| segment_name | An alpha numeric string identifying the segment name. |
| frame-delay | Y.1731 Ethernet Frame Delay Measurement. |
| frame loss | Y.1731 Ethernet Frame Loss Measurement. |
| interval | Specifies the transmit interval in seconds. The range is 1 to 90. |
10 seconds.
Use this command to configure the delay between two consecutive DMM frames. The configured delay is for both continuous and on-demand transmission. This command is optional, and if not configured the default interval is used.
The following example configures a transmission interval of 5 seconds for segment s2.
configure cfm segment s2 transmit-interval 5
This command was first available in ExtremeXOS 12.3.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB