show auto-peering

show auto-peering

Description

This command displays the status of BGP auto-peering and the learned auto-peering interfaces and corresponding remote peer information.

Syntax Description

This command has no arguments or variables.

Default

N/A

Usage Guidelines

All existing BGP show commands can be used to display the status of BGP peers and routes.

Example

The following example shows the status of auto-peering:

#show auto-peering
Type     : BGP
ISSU     : In Service
Router ID: 1.1.1.111     
AS       : 111
 
VLAN            Neighbor IP Address      Router ID       Remote AS  Port  ISSU 
--------------- ------------------------ --------------- ---------- ----- -----
SYS_BGP_0400    fe80::204:96ff:fe9d:6982 3.3.3.113       113        1     In  

History

This command was first available in ExtremeXOS 22.5.

Platform Availability

This command is available on the Summit X670-G2, X770, and the ExtremeSwitching X590, X690, X870 series switches.

This feature requires the Advanced Edge license. For more information about licenses, see the ExtremeXOS 22.6 Feature License Requirements.