Adds or deletes the physical port(s) to or from the end-to-end-transparent clock.
add |
Add ports. |
delete |
Delete ports. |
ports |
Physical ports. |
port_list |
List of ports to be added or deleted. |
one-step |
One step operation. |
N/A.
Use this command to add or delete the physical port(s) to, or from, the end-to-end-transparent clock. The fiber only 1G ports, 10G ports, and stack ports cannot be added to the End-to-End transparent clock.
The following example configures end-to-end transparent clock on the front panel ports:
configure network-clock ptp end-to-end-transparent add ports 1-4 one-step
The following example deletes the front panel ports from the end-to-end transparent clock:
configure network-clock ptp end-to-end-transparent delete ports 2-4
This command was first available in ExtremeXOS 15.1.
This command is available on Summit X770, X670-G2, and X460-G2 series switches.
Note
PTP commands can be used only with the Network Timing feature pack.