enable network-clock ptp

[enable | disable] network-clock ptp [boundary | ordinary] {{vlan} vlan_name}

Description

Use this command to enable PTP on the clock instance or on the specified VLAN (Virtual LAN) (clock port).

N/A.

Use this command to enable PTP on the clock instance or on the specified VLAN (clock port).

The following example enables the ordinary clock:

disable network-clock ptp ordinary

The following example enables the clock port lpbk-transit on the boundary clock:

disable network-clock ptp boundary vlan lpbk-transit

This command was first available in ExtremeXOS 15.1.

This command is available on the Summit X460-G2, X670-G2, and X770 series switches.

Published September 2018prev | next