configure iparp locktime

configure iparp {vr vr_name}{locktime locktime}

Description

Sets the time before a new entry can replace an old entry in the Address Resolution Protocol (ARP) table.

vr	Specifies setting a VR or VRF.
vr_name	Specifies the name of the VR or VRF.
locktime	Specifies setting a time before a new entry can replace an old entry.
locktime	Sets locktime value (range 0–30,000 milliseconds). Default 1,000 milliseconds.

The default locktime is 1,000 milliseconds.

The following example sets the locktime to 5,000 milliseconds:

configure iparp locktime 5000

This command was first available in ExtremeXOS 11.1.

Published September 2018prev | next