Displays the protocol filtering configuration and status.
port_list | Displays port list, separated by a comma ( , )or dash ( - ). |
all | Displays all ports. |
detail | Displays detailed configuration and status. |
Displays all protocol filters.
Use this command to display the protocol filtering configuration and status.
The following example displays the filtering configuration and status for ports 1-4:
# show ports 1-4 protocol filter Port Protocol Destination Protocol Id Field Field Field Packets # Filter Name Address Type Value Offset Value Mask Filtered ---- ----------- ----------------- ----- ------ ------ ------ ----- ---------- 1 my_list 01:80:C2:00:00:02 etype 0x8902 14 03:04 FF:FF 2300 01:80:C2:00:00:00 snap 0x4041 5000 01:80:C2:00:00:00 snap 0x4041 16 01:02> FF:FF> 5000 2 lacp 01:80:C2:00:00:02 etype 0x8902 14 01 FF 3200 3 (none) 4 (none) > indicates that the value was truncated to the column size in the output.Use the “detail” option to see the complete value.
The following example displays output for the show ports protocol filter detail command:
show ports 1-4 protocol filter detail Port 1 Protocol Filter Name: my_list Destination Address : 01:80:C2:00:00:02 Protocol Id Type : etype Protocol Id Value : 0x8902 Field Offset : 14 Field Value : 03:04 Field Mask : FF:FF Packets Filtered : 2300 Destination Address : 01:80:C2:00:00:00 Protocol Id Type : snap Protocol Id Value : 0x4041 Field Offset : 16 Field Value : 01:02:03:04 Field Mask : FF:FF:FF:FF Packets Filtered : 5000 Destination Address : 01:80:C2:00:00:00 Protocol Id Type : snap Protocol Id Value : 0x4041 Field Offset : Field Value : Field Mask : Packets Filtered : 5000 Port 2 Protocol Filter Name: lacp Destination Address : 01:80:C2:00:00:02 Protocol Id Type : etype Protocol Id Value : 0x8902 Field Offset : 14 Field Value : 01 Field Mask : FF Packets Filtered : 3200 Port 3 Protocol Filter Name: (none) Port 4 Protocol Filter Name: (none)
This command was first available in ExtremeXOS 15.5.