Clears all measurements of the Service verification test.
vlan | Specifies the VLAN (Virtual LAN) for the traffic test. |
vlan_name | Specifies a VLAN name. |
N/A.
Use this command to clear all measurements of the Service verification test .
The following example clears all measurments of the Extreme Service Verification tool on vlan1:
clear esvt traffic-test v1
This command was first available in ExtremeXOS 15.3.
This command is available on Summit X450-G2, X460-G2, X670-G2, X770, ExtremeSwitching X440-G2, X620 series switches, and stacking.