show netlogin session

show netlogin session {all | summary} {mac-address mac_address} {ports ports} {agent [convergence-endpointdot1x | mac | web-based]}

Description

Use this command to display the active authenticated sessions.

Syntax Description

all Include sessions with 'terminated' status.
summary Do not display detailed information.
mac-address Specify a MAC address.
mac_address Specify a MAC address.
ports Port or range of ports.
ports Port or range of ports.
agent Specify an agent type.
dot1x IEEE 802.1X Port-Based Network Access Control.
mac MAC authentication.
web-based Web-based authentication.
convergence-endpoint Convergence-endpoint authentication.

Default

N/A.

Usage Guidelines

None.

Example

The following example shows a summary of the active authenticated sessions:
# show netlogin session summary 
Port         Address type Address                  X W M C B
------------ ------------ ------------------------ ---------
23           mac          00:00:88:88:00:00            X   
23           mac          00:00:88:88:00:01            X   X
23           mac          00:00:88:88:00:02            X   X
23           mac          00:00:88:88:00:03            X   X
23           mac          00:00:88:88:00:04            X   
------------ ------------ ------------------------ ---------
X - dot1x
W - web-based
M - mac
C - convergence-endpoint
B - Blackholed in FDB
The following example shows information about the authentication sessions:
show netlogin session
Multiple authentication session entries
---------------------------------------

Port            : 1:1         Station address   : 00:04:f2:9f:48:fe
Auth status     : success     Last attempt      : Fri Nov 17 21:56:01 2017
Agent type      : cep         Session applied   : true
Server type     : local       VLAN-Tunnel-Attr  : None
Policy index    : 2           Policy name       : NProfile_16 (active)
Session timeout : 0           Session duration  : 2 days, 21:57:19
Idle timeout    : 300         Idle time         : 0:00:00
Auth-Override   : enabled     Termination time  : Not Terminated

History

This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, and X770 series switches.