Display the match conditions and actions of installed OpenFlow flows.
flow_name | Specifies the flow name. |
None.
Use this command to determine the number and details of OpenFlow flows installed on the switch by an OpenFlow controller.
If you do not specify a flow name, information for all flows will be displayed.
The following example displays the current OpenFlow flows:
show openflow flows Total number of OpenFlow flows : 3 Total number of default flows : 3 Flow name Type Duration (secs) Prio Packets ---------------- ---- ------------------- ----- -------------------- of_0 ACL 14 0 0 Match : Input Port : 24 Src MAC : 00:00:00:00:00:01 Dst MAC : 00:00:00:00:24:24 Actions: output:17, cookie:0x10707658 of_1 ACL 14 0 0 Match : Input Port : 24 Src MAC : 00:00:00:00:00:02 Dst MAC : 00:00:00:00:24:24 Actions: output:17, cookie:0x10707658 of_2 MPLS 13073 0 0 Match : Dst MAC : 00:04:96:83:73:f2 VLAN ID : 101 Ethernet Type : 0x8847 MPLS BoS : 0 MPLS Label : 0x31 Actions: pop_vlan,pop_mpls:0x0800,goto_table:1, cookie:0x1 ofDefault_0 ACL 1590 0 0 Match : Actions: CONTROLLER ofDefault_2 ACL 1590 0 22 Match : Ethernet Type : 0x88cc Actions: CONTROLLER ofFDB_0 ACL 1590 0 0* Match : FDB Entry Actions: forward Packets: (*) Cumulative packet count for all FDB flows
This command was first available in ExtremeXOS 15.3.
Information about default flows and additional match and action types were added in ExtremeXOS 15.7.1.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the OpenFlow feature, see the ExtremeXOS 22.6 Feature License Requirements document.