Configures the timer value in seconds returned as part of the DHCP (Dynamic Host Configuration Protocol) response.
vlan_name | Specifies the VLAN (Virtual LAN) on whose ports netlogin should be disabled. |
lease-timer | Specifies the timer value, in seconds. |
N/A.
The timer value is specified in seconds. The timer value range is 0 - 4294967295, where 0 indicates the default (not configured) value of 7200 second.
The following command configures the DHCP lease timer value for VLAN corp:
configure vlan corp dhcp-lease-timer <lease-timer>
This command was first available in ExtremeXOS 11.0.