Display RA Guard Configuration

About this task

Display configured RA Guard policy information.

Procedure

To enter User EXEC mode, log on to the switch.
Display configured RA Guard policy information:

show ipv6 fhs ra-guard policy WORD<1–64>

Example

Switch:1# show ipv6 fhs ra-guard policy
============================================================================================================
                                                  IPv6 Ra Guard Policy Info
============================================================================================================
                                                                                     MIN-HOP MAX-HOP MANAGED
POLICY-NAME    RA-SRC-ADDR-LIST  RA-MAC-ADDR-LIST  RA-PREFIX-LIST   LIMIT    LIMIT   CON-FLAG PREF
-------------------------------------------------------------------------------------------------------------
 Ra_guard_pol1    None              None               acl1           0        0         None            None
-------------------------------------------------------------------------------------------------------------
  
All 1 out of 1 Total Num of ra-guard policy entries displayed

Variable Definitions

The following table defines parameters for the show ipv6 fhs ra-guard policy command.


Variable	Description
`WORD<1–64>`	Displays the RA Guard policy for the specified policy-name. By default, all the configured RA Guard policies are displayed.