Before defining client support settings for a controller,
service platform, or access point managed WLAN, refer to the following deployment
guidelines to ensure the configuration is optimally effective:
Clients on the same WLAN associated to an AP can communicate
locally at the AP Level without going through the controller or service platform. If
this is undesirable, an access point's Client-to-Client
Communication option should be disabled.
When the wireless client idle time setting is exceeded, the
client is no longer able to access WLAN resources and must re-authenticate. The
default value is 1,800 seconds.
Access points can support up to 256 clients per access point or
radio.
