You can add a new SNMP ACL policy
or edit an existing policy configuration.
Procedure
Select
Add to create a new SNMP firewall rule.
Select an
existing policy and click Edit to modify the attributes of that
policy‘s configuration. Existing policies can be removed by
highlighting them and selecting Delete.
IP
SNMP ACL - Add/Edit screen
If adding a
ne wpolicy, provide a new IP SNMP ACL Name up to 32 characters in length to help
distinguish this ACL from others with similar rules.
Select
+ Add
Row to launch a sub-screen where the ACL‘s
permit/deny and network type rules can be applied.
Allow
Select this option to allow the SNMP
MIB object traffic. The default setting
is to permit SNMP traffic.
Type
Define whether the permit or deny ACL
rule applied to the ACL is specific to a
Host IP address, is applied to
a Network address and subnet
mask, or is applied to Any. The default setting is
Network.
IP
If Type is not
Any, provide the IP
address or host name in this
field.
Select
Add to add additional IP firewall rule
configurations.
Select
Remove to remove selected IP firewall rules
as they become obsolete for filtering network access
permissions.
Select
OK when completed to update the IP firewall
rules.
Select
Reset to revert the screen to its last
saved configuration.
