Wireless Controller and Service Platform System Reference Guide

Select Add to create a new policy, Edit to modify the attributes of an existing policy or Delete to remove obsolete policies.

The Add/Edit Network Service Alias screen displays:

If adding a new Network Service Alias, give it a name up to 32 characters. Ensure a $ precedes the name.

Select + Add Row, in the Entry table and specify the following parameters:


Protocol	Specify the protocol for which the alias is created. Use the drop down to select the protocol from eigrp, gre, icmp, igmp, ip, vrrp, igp, ospf, tcp and udp. Select other if the protocol is not listed. When a protocol is selected, its protocol number is automatically selected.
Source Port (Low and High)	This field is relevant only if the protocol is tcp or udp. Specify the source ports for this protocol entry. A range of ports can be specified. Select the Enter Range button next to the field to enter a lower and higher port range value. Up to eight (8) ranges can be specified.
Destination Port (Low and High)	This field is relevant only if the protocol is tcp or udp. Specify the destination ports for this protocol entry. A range of ports can be specified. Select the Enter Range button next to the field to enter a lower and higher port range value. Up to eight (8) such ranges can be specified.

Click OK when completed to update the network service alias rules.

Click Reset to revert the screen back to its last saved configuration.

Adding and Editing Network Service Alias