BGP Summary

To review BGP statistics summary:
  1. Select the Statistics menu from the Web UI.
  2. Expand the RF Domain node.
  3. Select a Wireless Controller.
  4. Select BGP from the left-hand side of the UI.

    The Statistics > Controller > BGP > Summary screen displays by default in the right-hand pane.

    Click to expand in new window
    GUID-06DAD7EA-9627-47F5-A758-61B6B9896126-low.png
    The Summary screen displays the following information:
    Neighbor Lists the IP address of neighbor BGP supported devices.
    ASN Lists the ASN (Autonomous System Number) assigned to each listed neighbor BGP peer. ASN is a set of routers under the same administration that use IGP (Interior Gateway Protocol) and common metrics to define how to route packets.
    Msg Sent Lists the number of messages sent out of this BGP peer.
    Msg Received Lists the number of messages received by this BGP peer.
    In Queue Lists the number of messages in the controller or service platform queue that have not yet been read (processed).
    Out Queue Lists the number of messages in the controller or service platform queue that have not yet been sent.
    Status Displays the status of each listed BGP neighbor as Active or Disabled.
    Uptime Displays the time duration in HH:MM:SS format since the connection to this neighbor BGP peer was established.
  5. Periodically, click Refresh to update the screen‘s counters to their latest value.
9036512-00 Rev AA