Define or override the following
parameters in the OSPF
Settings field:
Priority
Select this option
to set the OSPF priority used to select the network
designated route. Use the spinner control to set the
value from 0 - 255.
Cost
Select this option
to set the cost of the OSPF interface. Use the spinner
control to set the value from 1 - 65,535.
Bandwidth
Set the OSPF bandwidth from 1 - 10,000,000 KBps.
From the Chosen Authentication
Type drop-down list, select the authentication type used to
validate credentials within the OSPF dynamic route.
The available options are None, null, simple-password,
and message-digest. The default value is None.
Select + Add Row at the
bottom of the MD5
Authentication table to add the Key ID and Password used for an
MD5 validation of authenticator credentials.
Key ID
Use the spinner control to set the
unique OSPF message digest
authentication key ID. The available
range is from 1 - 255. The password is
the OSPF key either displayed as series
or asterisks or in plain text (by
selecting Show).
Password
Set the OSPF password. This value is
displayed as “asterisk” (*). Select
Show to expose the
characters in the password.
Click OK to save the
changes and overrides to the Security screen.
Click Reset to revert to the last saved configuration.
